Release 03.00.02
-----------------------------------------------------------------------
- Changed: 	Fixed problem during test scale function

Release 03.00.01
-----------------------------------------------------------------------
- Changed: 	EWCOM WGA, return weight value is now like PR1613

Release 03.00.00
-----------------------------------------------------------------------
- Attention:	Based on Pro Controller 02.12.04 will only work
		with firmware version 03.20.00 or newer
- Changed: 	New implementation of the alibi memory

-----------------------------------------------------------------------
-----------------------------------------------------------------------
-----------------------------------------------------------------------

Release 02.12.04
-----------------------------------------------------------------------
- Outputs 7 + 7 ale available now via MX 1222 and MX 1223

Release - 02.12.03
-----------------------------------------------------------------------
- 0000353: Analogtest fails if Error 2
- 0000350: Parameters in CONFIG are modified by 'overwrite' now
- 0000345: Clock is now also checked while running program START
- 0000346: Text 'Limit' corrected
- 0000347: Text 'Build in' replaced by 'Builtin RS232'
- 0000348: Current configuration data is restored imediately if
           'Store data ?' is 'No'
- 0000352: BCD digital output configuration is not longer reset if
           output 1 is 'none'

Release 02.12.02
-----------------------------------------------------------------------
1 - 00000191 Label template prepared for NLE 2.8

Release 02.12.01
-----------------------------------------------------------------------
1 - Limit A 1 on: Auch die Anzeige ist jetzt korrekt.

Release 02.12.00
-----------------------------------------------------------------------
1 - Compiled with PR1750/50
2 - Fieldbus interface set to width of 64 Byte
3 - Requires Firmware 3.12 or better

Release 02.10.00
-----------------------------------------------------------------------
1 - Adapted to X4 hardware.
2 - BCD output follows display now is configured.
3 - Analogue output switches to Gross if not tared and configured.
4 - Old EWCOM commands "WGA" and "WSA" are working correct now.
5 - Specific messages if problems with printig.
6 - Fixtare via SPM added
7 - Aborting dialog changed

Release  02.00.00
-----------------------------------------------------------------------
Requires Firmware 2.20 or better !